Operations - Yamaha SRT-700 Owner's Manual

Operations

Indicators
The indicators on the front panel flash or light up, to
indicate the operation and setting status.
In this manual, illustrations of the nine in-line indicators
are used for explanation.
: Off
: Lights up
: Flashes
(Example: When the PLII indicator and SURROUND indicator
flash, and the TV indicator lights up)
En
8
Input keys
Select an input source to be played back.
TV ....................TV audio
BD/DVD ...........Audio from a device connected to
the BD/DVD input jack
ANALOG .........Audio from a device connected to
the ANALOG input jack
BLUETOOTH
.........................Audio from a
device
The indicator for the selected input source lights up.
(Example: when TV is selected)
HINT
• To play audio of the playback device connected to the TV or
to watch videos of the playback device, set the TV's input
source to the playback device.
• For details on connection, refer to "Listening to the
sound from a device" (p.10).
SUBWOOFER keys (+/–)
Adjust the volume of the subwoofer.
Volume down (–)
Volume up (+)
VOLUME keys (+/–)
Adjust the volume of the unit.
Volume down (–)
Volume up (+)
★
LEARN key
Sets the unit to the TV's remote control learning
mode (p.12).
★: Keys that require pressing for more than 3 seconds
LEARN, BLUETOOTH STANDBY, AUDIO DELAY
1
Remote control signal transmitter
Transmits infrared signals.
connected
2
★
BLUETOOTH STANDBY key
Enables/disables the
(p.11).
★
3
★
standby mode