Trouble Shooting; Precautions - Ribao CS-311S Operation Manual

CS-311S Operation Manual V1.2

10. Trouble Shooting

During self-testing or machine working status, sometimes the LCD
screen may display following error code:
（1）ERROR ADJUST
·When it display ERROR ADJUST, it means the signal of alloy sensor is
abnormal, the self-test can not be done normally, please contact your
local distributor for solution.
（2）ERROR 01
·When it displays ERROR 01, it means the IR transistor is blocked,
please check the IR transistor and also the connecting cable. After the
problem is solved, please press CLR key to enter into main interface.
If the problem can not be solved, please contact your local distributor
for solution.
Notes: If there are any foreign things get jammed on the rail, the
dropped coins may not be counted, which will cause counting
mistake. Therefore, please clean all coins by moving foreign things
before sorting.

11. Precautions:

·Power line using the machine configuration.
·Unplug the power cord before moving the machine.
·Avoid operation under direct sunlight.
ADJUST
ERROR:
CHECK THE SENSOR 0
01
ERROR:
CHECK THE SENSOR 1
Page 15 of 17