CCD image sensor, ensure to separate different denomination coins with 0.2mm diameter difference(without wearing) which ensures more accurate sorting of the coins. CS-600B can sort 6 kinds of coins at the same time. The printer, external display or computer can be connected through RS-232 socket, all data can be printed out at any time.
CS-600B OPERATION MANUAL V1.1 Key Panel Key Function: 1) START/STOP:Start and Stop 2) HOME:Back to main interface 3) :Select the list of different Channels / memory units 4) CLR:Clear 5) SET:Debug reserve key 6) VALUE/COUNT : To switch the display mode between quantity and amount 7)...
CS-600B OPERATION MANUAL V1.1 Operating Procedures ·Turn on the power switch,the display shows the amount as right picture, with decimal point. ·Press START/STOP to start, the machine automatically enters into amount display mode, with decimal point. After start, the motor rotates and counting starts.
Page 8
CS-600B OPERATION MANUAL V1.1 Data save: ·Press MT key to save the data and the indicating lamp is on ·If the indicating lamp is ON, it means the channel is with data saved inside; ·In single channel modes, press MT to save the data of this channel only;...
Page 9
CS-600B OPERATION MANUAL V1.1 display is zero. Similar to data saving procedure: ·In single channel modes, accumulate only the data of this channel; ·In total mode, accumulate the data in all the channels. Batch setting: ·Press BAT key to enter into batch setting mode.
Page 10
CS-600B OPERATION MANUAL V1.1 counted number. Batch setting procedure: ·Press CLR to clear to Zero; ·+1000、+100、+10、+1 keys are for batch number setting: ①+1000 is 1000, +100 is 100, +10 is 10, +1 is 1; ②One press increase the digit by 1. e.g. press +1 key once is 1, double press is 2;...
CS-600B OPERATION MANUAL V1.1 Set up the Coin Bag Holder & Coin Tube Holder(Option) Install the Coin Bag and fix with the clip. Rotate and hang the Coin Tube Holder. Install the Hook Holder on the Coin Tube Holder.
CS-600B OPERATION MANUAL V1.1 Put the Paper Tube into the Coin interior Tube and the Paper Tube will be held by the Hook Holder According to the coin quantity of each paper tube, set the batch number (in batch counting mode), then start counting.
Page 13
CS-600B OPERATION MANUAL V1.1 ·When Error1 occurs, it means the front cover welding is open, and close the front cover welding back to the normal coin counting procedure. ·When Error2 occurs, it means some coins may be jammed on CIS sensor , please remove the coins.
CS-600B OPERATION MANUAL V1.1 Daily Maintenance ·Be sure to turn the main power off before attempting daily maintenance. ·Clean the coin rail at least once a day with a brush. ·Clean the disc at least once a day with a brush.
Page 15
CS-600B OPERATION MANUAL V1.1 *** In the interests of our ongoing policy of continual product improvement, specifications are subject to change without prior notice. Page 15 of 15...