Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Ribao CS-311S
Summary of Contents for Ribao CS-311S
- Page 1 2+1 POCKETS COIN SORTER CS-311S Operation Manual...
-
Page 2: Table Of Contents
CS-311S Operation Manual V1.2 CONTENTS 1. Introduction ............3 2. Specifications ............. 3 3. Function ............. 4 4.Diagram .............. 4 5. Power Socket board ..........5 6. Key Panel ............6 7. Main Display Modes ..........7 8. Operating Procedures ......... 7 9. -
Page 3: Introduction
CS-311S Operation Manual V1.2 1. Introduction CS-311S is a coin sorter designed and produced by our company. It has counterfeit coin detection function. With the installed advanced eddy current sensor, it can simultaneously detect the metal coins’ diameter, thickness and material, based on this feature, our CS-311S can automatically recognize foreign coins, counterfeit coins and sheet metals etc. -
Page 4: Function
CS-311S Operation Manual V1.2 3. Function CS-311S is able to identify, count and sort the coins, it can identify at most 20 kinds of denominations, also it has one reject pocket for fake and foreign coins. From left to right it is channel2 channel1 reject pocket The user can sort the desired denomination into the desired pocket. -
Page 5: Power Socket Board
CS-311S Operation Manual V1.2 5. Power Socket board ⑥：Power switch ⑦：Power socket ⑧：RS232（for communication with PC） ⑨：PS2（ ） reserved interface for external display ⑩：USB（for software upgrading） ⑪：LAN（reserved socket for network） Page 5 of 17... -
Page 6: Key Panel
CS-311S Operation Manual V1.2 6. Key Panel Key Function: 1） 0 ~ 9 : Numeric key for fast batch number settings 2） START/STOP: Start or Stop 3） SET: Set MENU or set some functions 4） ESC: Return to MENU or clear rejected coin records 5）... -
Page 7: Main Display Modes
CS-311S Operation Manual V1.2 Main Display Modes （1）Total Amount & Quantity Display Mode: MIX- COUNT STOP VALUE: 125.90 COUNT: （2）Separate Channel Amount & Quantity Display Mode: AMOUNT VALUE COUNT 100.00 2.00 25.00 0.50 0.90 0.01 Operating Procedures Turn on the machine, the machine will enter into self-test mode and... - Page 8 CS-311S Operation Manual V1.2 MIX-COUNT means mix-counting mode RUN/STOP is the sign showing machine’s running or stop status. is the sign of Batch Function is ON. VALUE is for total Amount. COUNT is for total Quantity, shows the quantity of foreign/fake coins.
- Page 9 CS-311S Operation Manual V1.2 shown as below: SDC- COUNT STOP 2.00 VALUE: 0.00 COUNT: Under MIX-COUNT mode, all the genuine coins will go to 3 pocket, foreign coins will go to 1 pocket; Under SDC mode, there are SDC-COUNT and SDC-REJECT. Under SDC-COUNT interface, press Key to choose the denomination you want to sort.
-
Page 10: Function Settings
CS-311S Operation Manual V1.2 ·Under main interface,press M+Key to save the quantity and amount for genuine coins.It saves the accumulated data of the counting results 。 Under main interface, when the counting quantity and amount for genuine coins is 0, you can press M+ key to clear the saved data. - Page 11 CS-311S Operation Manual V1.2 NOTES：The above steps are used for setting the BATCH number. If you need to set the BATCH, you need to turn on the BATCH function in system. Under main interface, press key to turn on the BATCH on/off. When BATCH function is on, there is a B shown at the left corner;...
- Page 12 CS-311S Operation Manual V1.2 mode, the VALUE will flash. At this moment, you can change the value of this channel through pressing numeric key 9. Press CLRkey，the setted the value can be cleared to be 0 Notes: The value is already set in the factory and the function is locked so the user can not change the value.
- Page 13 CS-311S Operation Manual V1.2 2)BUZZER BUZZER：ON Under this interface, please press key to turn ON/OFF this function. After setting, press ESC key to return to main menu interface. 3)POINT POINT：ON Under this interface, please press key to turn ON/OFF this function. After setting, press ESC key to return to main menu interface.
- Page 14 CS-311S Operation Manual V1.2 >MAGNET1: 4 ms MAGNET2: 5 ms MAGNET3: 6 ms Under this interface, please press key to choose MAGNET 1,2, or 3, and then press SET key to set solenoid activation time(suggested range is 3~9ms). By press key, the time will be increased or decreased.
-
Page 15: Trouble Shooting
CS-311S Operation Manual V1.2 10. Trouble Shooting During self-testing or machine working status, sometimes the LCD screen may display following error code: （1）ERROR ADJUST ADJUST ERROR: CHECK THE SENSOR 0 ·When it display ERROR ADJUST, it means the signal of alloy sensor is abnormal, the self-test can not be done normally, please contact your local distributor for solution. -
Page 16: Daily Maintenance
CS-311S Operation Manual V1.2 ·Do not put your hands, tools and clothes into the hopper to avoid personal injury or malfunction of the machine. ·Don’t open the Visible Cover during operation. 12. Daily Maintenance ·Be sure to unplug the power cord before daily maintenance. - Page 17 CS-311S Operation Manual V1.2 *** In the interests of our ongoing policy of continual product improvement, specifications are subject to change without prior notice. Page 17 of 17...