Gigaset Maxwell Basic Manual page 36

Configuring other settings with the Web configurator
Telephony
Changing the standard send connection
If the telephone has more than one VoIP connection, outgoing calls are initiated via the standard
send connection (
Changing the standard send connection:
¤
Settings Telephony
All the configured connections are shown. The check box
shows which connection is currently selected.
¤
Check the connection required
Only active connections can be selected.
Settings for Call Waiting
Specify the telephone's response when another call comes in during a call.
¤
Settings Telephony
For each connection:
Prevent/permit Call Waiting:
¤
Select the option under Display waiting call (
deselect ( = Call Waiting not permitted)
Permit Call Waiting:
¤
Select Acoustic signal from the list
Off: the incoming call is shown in the display only
or signalling with a Call Waiting tone (beep): once or every 4, 10, or 20 seconds
Save the settings:
34
p. 11).
Connections
Set
Call Settings
Set
under Default send connection
= Call Waiting permitted) /