Adjustment - Panasonic F0205Y0 Operating Instructions Manual

Adjustment

$ Automatic white balance control (AWC)
There are two white balance memories, "AWC A" or "AWC
B" for two different light sources color temperatures, with the
automatic white balance setting. Then, when the two
different light sources are encountered, you may operate the
camera properly by simply change the white balance mode
to either AWC A or AWC B. There is no need to readjust the
camera to the ambient conditions.
❈ The preset conditions will be renewed whenever you input
new conditions.
1. Turn the white balance selection switch to either "AWC A"
or "AWC B" of RCU or select the white balance mode
either AWC A or AWC B by menu.
2. Aim the camera at a white object (a white wall or a white
handkerchief) and zoom in to enlarge the image as much
as possible.
[ADJUSTMENT by CAMERA]
3. In normal shooting mode:
Press the ITEM/AWC switch for over 2 second.
ITEM/AWC
switch
[ADJUSTMENT with the RCU (RCB, Hybrid control panel)]
4. When the AUTO set switch is turned to AWC, the white
balance will be automatically set. While the system is
being set, auto warning indicator (LED) blinks and it goes
out when the white balance setting is completed. If the
lamp remains lit, the setting must be tried again.
AUTO LED
-23-
CAMERA
RCU (RCB)
AUTO set switch