Panasonic F0205Y0 Operating Instructions Manual page 43

$ Setting and changing of the setting
items (User Mode)
6 Iris, Shutter, Gain Set Display
Video Level Adjustment [Picture Level: –50 to +50]
Convergence level of AUTO IRIS, AUTO GAINUP, ELC
can be adjusted.
Detecting Ratio Adjustment
[Light PEAK/AVG: P50 to A50]
The ratio of AUTO IRIS, AUTO GAINUP, ELC detected
peak to average can be adjusted within a range.
Photometric Measurement Method Setting
[Light Area: All, Center, Top cut, BTM cut, R/L cut]
A photometric measurement method can be selected for
AUTO IRIS, AUTO GAINUP, ELC.
All: All the screen area is measured.
Center: The screen is measured mainly in the center
area, about one-third of both the top and
bottom and one-third of both the right and left
portions of the screen are excluded from
measurement.
Top cut: About one-third of the top portion of the screen
is excluded from measurement.
BTM cut: About one-third of the bottom portion of the
screen is excluded from measurement.
R/L cut: About one-third of both the right and left
portions of the screen are excluded from
measurement.
Auto Iris Level Fine Adjustment
[Auto Iris Adjust: OFF, ON]
OFF: The iris control is invalid when the iris switch on the
RCU (RCB) or on the hybrid control panel is in the
AUTO position.
ON: Fine adjustment of auto iris convergence level can
be made with the iris control when the iris switch
on the RCU (RCB) or on the hybrid control panel is
in the AUTO position.
-43-
RCU (RCB)
Iris control
Iris switch