Cooking More Food; How To Cook Another Batch Of Food - T-Fal OptiGrill Plus Instructions For Use Manual

3
Cooking
10
ALU124-IFU_2100092360OpitGrill_Plus_2L.indb 10
19
21
19-20 When the color corresponding to
your choice of cooking level appears,
open the appliance and remove your
food.
21 Close the appliance. The control panel
will light up and set itself to 'choice of
program' mode.
Comment: the security system will
20
turn off automatically if no program
selection is made.

Cooking more food

If you want to cook a second batch of
food, please pre-heat the appliance
again (see section 2. "Pre-heating",
starting from point 9) even if you want
to cook the same type of food.

How to cook another batch of food:

After finishing your first batch of food:
1. Make sure the appliance is closed
with no food inside.
2. Select the appropriate cooking
mode/program (this step is necessary
even if you decide to pick the same
cooking mode than for the previous
batch of food).
3. Press the "OK" button: the appliance
starts pre-heating. The pre-heating
is symbolized by the cooking level
indicator that flashes purple.
4. The pre-heating is complete when
an audible beep is heard and the
cooking level indicator stops flashing
purple.
5. After the pre-heating, the appliance
is ready for use. Open the grill and
place the food inside the appliance.
Important:
- Please note that any new batch
of food, the pre-heating phase is
mandatory.
10/07/2015 13:2