Hotpoint 25 Owner's Manual And Installation Instructions page 19

INSTALLING THE WATER LINE
TURN THE WATER ON AT THE
10
SHUTOFF VALVE
Tighten any connections that leak.
PLUG IN THE REFRIGERATOR
11
Arrange the coil of tubing so that it does not vibrate
against the back of the refrigerator or against the
wall. Push the refrigerator back to the wall.
Installation Instructions
(CONT.)
START THE ICEMAKER
MODELS)
Set the icemaker power switch to the ON position.
The icemaker will not begin to operate until it
reaches its operating temperature of 15°F
(-9°C) or below. It will then begin operation
automatically if the icemaker power switch is in
the ON position.
NOTE: In lower water pressure conditions, the
water valve may turn on up to 3 times to deliver
enough water to the icemaker.
(ON SOME
19