Planar RS232 User Manual page 17

Command
Setting
Code
Default IPV4.GATEWAY
Gateway
DHCP NETWORK.DHCP
Diagnostic DIAGNOSTIC.
Color COLOR
Display DISPLAY.NAME
Name
Display DISPLAY.POWER
Power
DisplayPort DP.TYPE
Type
DNS Server 1 NETWORK.DNS1
DNS Server 2 NETWORK.DNS2
Modifiers
1206 =? 0 = STATIC String
[None =
Current (for
reads only]
[None =
STATIC (for
writes only]
1207 =? 0 = OFF
1 = ON
206 =?+- Zone 0 = RED
0 = ZONE.1 1 = GREEN
1 = ZONE.2 2 = BLUE
2 = ZONE.3 255 = OFF
3 = ZONE.4
253 =
ALL.INPUT
254 = ALL
254 =
ALL.ZONE
255 =
CURRENT
[None =
CURRENT]
2404 =? String
1408 =?+- 0 = OFF
1 = ON
1904 =?+- 0 = 1.1
1 = 1.2
1212 =? 0 = STATIC String
[None =
Current (for
reads only]
[None =
STATIC (for
writes only]
1213 =? 0 = STATIC String
[None =
Current (for
reads only]
[None =
STATIC (for
writes only]
Planar UltraRes Series RS232 User Manual
Operands
Yes [Read the current default gateway value]
IPV4.GATEWAY?
IPV4.NETMASK:"10.15.0.1"
[Write the default gateway for static IP]
IPV4.NETMASK(STATIC)="192.168.12.1"
IPV4.NETMASK(STATIC):"192.168.12.1"
Yes NETWORK.DHCP=ON
NETWORK.DHCP:ON
No [For Zone 1]
DIAGNOSTIC.COLOR(ZONE.1)=OFF
DIAGNOSTIC.COLOR(ZONE.1):OFF
[For the current zone]
DIAGNOSTIC.COLOR=BLUE
DIAGNOSTIC.COLOR:BLUE
Yes DISPLAY.NAME="Conference Room 1"
DISPLAY.NAME:"Conference Room 1"
Yes DISPLAY.POWER=ON
DISPLAY.POWER:ON
No DP.TYPE=1.2
DP.TYPE:1.2
Yes [Read the current DNS server 1 value]
NETWORK.DNS1?
NETWORK.DNS1:"172.16.0.140"
[Write the DNS server 1 for static IP]
NETWORK.DNS1(STATIC)="8.8.8.8"
NETWORK.DNS1(STATIC):"8.8.8.8"
Yes [Read the current DNS server 2 value]
NETWORK.DNS2?
NETWORK.DNS2:"172.16.0.191"
[Write the DNS server 2 for static IP]
NETWORK.DNS2(STATIC)="8.8.4.4"
NETWORK.DNS2(STATIC):"8.8.4.4"
Example
See Main -> Advanced
Settings -> Network -> Default
Gateway
See Main -> Advanced
Settings -> Network -> DHCP
See Main -> Image Adjust ->
Diagnostic Color
Sets the name shown on the
title of the Remote Monitoring
Software pages
See the IR remote control keys
ON and OFF
See Main -> Advanced
Settings -> System Settings ->
DisplayPort Type
See Main -> Advanced
Settings -> Network -> DNS
Server
Selects a secondary DNS
server
RS232 Codes
Notes
17