1. Manuals
  2. Brands
  3. Clay Paky Manuals
  4. Projector
  5. C61415
  6. Instruction manual

Clay Paky C61415 Instruction Manual

A.leda b-eye led-based moving light
Hide thumbs Also See for C61415:
Table of Contents

Advertisement

Quick Links

Download this manual
INDEX
Page Contents
2
Safety Information
3
Unpacking and preparation
4
Installation and start-up
5
Control panel
7
Menu setting
18
Maintenance
19
Accessories
20
Technical information
20
Cause and solution of problems
21
Channel functions
A.LEDA B EYE K10 EASY
A.LEDA B EYE K10
A.LEDA B EYE K20
INSTRUCTION MANUAL
Congratulations on choosing a Clay Paky product
We thank you for your custom.
Please note that this product, as all the others in the rich Clay
Paky range, has been designed and made with total quality to
ensure excellent performance and best meet your expectations
and requirements.
Carefully read this instruction manual in its entirety and keep it
safe for future reference. It is essential to know the information
and comply with the instructions given in this manual to ensure
the fitting is installed, used and serviced correctly and safely.
CLAY PAKY S.p.A. disclaims all liability for damage to the fitting
or to other property or persons deriving from installation, use and
maintenance that have not been carried out in conformity with this
instruction manual, which must always accompany the fitting.
CLAY PAKY S.p.A. reserves the right to modify the
characteristics stated in this instruction manual at any time and
without prior notice.
1
C61415
C61419
C61420

Advertisement

Table of Contents
loading

Related Manuals for Clay Paky C61415

Summary of Contents for Clay Paky C61415

  • Page 1 Menu setting the fitting is installed, used and serviced correctly and safely. CLAY PAKY S.p.A. disclaims all liability for damage to the fitting Maintenance or to other property or persons deriving from installation, use and...

  • Page 2: Safety Information

    SAFETY INFORMATION SAFETY INFORMATION IMPORTANT: Clay Paky recommends you carefully read and keep the safety information on this product, also available in digital format at the following link: http://www.claypaky.it/en Ref: [FIS00J – Safety Information A.leda B-EYE] INFORMAZIONI DI SICUREZZA IMPORTANTE: Clay Paky raccomanda di leggere accuratamente e conservare le informazioni di sicurezza relative a questo prodotto, sempre reperibili in versione digitale al seguente link: http://www.claypaky.it/en/download...

  • Page 3: Unpacking And Preparation

    UNPACKING AND PREPARATION 2 x 183102/805 Packing contents - Fig. 1 UNLOCKED LOCKED PAN Mechanism Lock and Release (every 90°) - Fig. 2 A.LEDA B EYE...

  • Page 4: Installation And Start-Up

    INSTALLATION AND START-UP Installing the projector - Fig. 3 The projector can be installed on the floor resting on special rubber feet, on a truss or on the ceiling or wall. WARNING: with the exception of when the projector is positioned on the floor, the safety cable must be fitted. Cod. 105041/003 available on request). This must be securely fixed to the support structure of the projector and then connected to the fixing point at the centre of the base.

  • Page 5: Control Panel

    CONTROL PANEL Mains Connecting to the mains supply - Fig. 5 DMX 512 5 PIN SCREEN SIGNAL SIGNAL DMX 512 3 PIN SIGNAL SCREEN SIGNAL Connecting to the control signal line (DMX) - Fig. 6 Use a cable conforming to specifications EIA RS-485: 2-pole twisted, shielded, 120Ohm characteristic impedance, 22-24 AWG, low capacity. Do not use microphone cable or other cable with characteristics differing from those specified.

  • Page 6: Using The Menu

    Reversal of the display - Fig. 8 To activate this function, press UP and DOWN keys simultaneously while the display is in the rest mode. This status will be memorised and maintained even for the next time it will be switched on. To return to the initial state, repeat the operation all over again. Setting the projector starting address On each projector, the starting address must be set for the control signal (addresses from 1 to 512).

  • Page 7: Menu Setting

    MENU SETTING XXX = default value Main Menu Level 1 Level 2 Level 3 Choices / Values Standard Mode Shape Source Basic Engine Art-net Universe 0 - 255 DMX Address 1 - 512 Disabled Mode RGBW Pixels Engine Source Art-net Universe 0 - 255 DMX Address...
  • Page 8 Main Menu Level 1 Level 2 Level 3 Choices / Values Invert Pan On / Off Invert Tilt On / Off Swap Pan-Tilt On / Off Encoder Pan-Tilt On / Off Standard P/T Homing mode Sequenced 0 degree Pan / Tilt 90 degrees Pan Home Def Pos 180 degrees...
  • Page 9 Main Menu Level 1 Level 2 Level 3 Choices / Values System Errors Read / Reset Total Hours Read Fixture Hours Partial Hours Read / Reset Total Hours Read LED Energy Tot Partial Hours Read / Reset Aleda fw Fw.rev. CPU board Hw.rev.

  • Page 10: Setup Menu

    NOTE: On grey the default options SET UP MENU For greater programming ease using the DMX control unit and Media- server Art-net, channel mapping is divided into BASIC ENGINE and Set Up PIXEL ENGINE (see details in Channel Function). Basic BASIC ENGINE Mode Engine...

  • Page 11: Ethernet Interface

    ETHERNET INTERFACE Ethernet Control Set Up It lets you set the Ethernet settings to be attributed to the projector. Interface Protocol Control Protocol It lets you select the Art-net “Control Protocol” to be assigned according to the control unit used. The following options are available: •...

  • Page 12: Silent Mode

    Standard: Pan & Tilt are simultaneously reset. Sequenced: Tilt is reset first followed by Pan. 3) Press to confirm the selection or LEFT to keep the current setting. Pan Home Def Pos Pan Home Lets you assign the Pan channel “home” position at the end of Reset, Def Pos without a DMX input signal.

  • Page 13: Information Menu

    Special 2) Use the UP and DOWN keys to select one of the following Set Up Functions settings: - Curve 1 - Curve 2 - Curve 3 - Curve 4 3) Press to confirm the selection or LEFT to keep current settings. RGB Gamma Gamma Lets you select three different RGBW gamma curves.
  • Page 14 FIXTURE HOURS Total Fixture Partial XXX Used for displaying projector operating hours (total and partial). Hours Reset... 1) Press - Hours total and partial appears on the display. Total counter Counts the number of projector working life hours (from manufacture to date). Partial counter Counts the number of partial projector working life hours since the last reset to date.

  • Page 15: Manual Control

    MANUAL CONTROL RESET Manual Reset Used for resetting the projector. Control 1) Press to reset the projectors, a confirmation message (Are you sure ?) appears on the display. 2) Select YES to starting reset the fixture or NO to keep the current setting and return to the top menu level.
  • Page 16 - General cleaning of internal parts. - Restoring lubrication of all parts subject to friction, using lubricants specifically supplied by Clay Paky. - General visual check of the internal components, cabling, mechanical parts, etc. - Electrical, photometric and functional checks; eventual repairs.
  • Page 17 Battery removal - Fig. 10 This product contains a rechargeable lithium iron tetraphosphate battery. To preserve the environment, please dispose the battery at the end of its life according to the regulation in force. LiFePO4 Continue A.LEDA B EYE...

  • Page 18: Maintenance

    MAINTENANCE Note: - Do not disconnect flat cable when A.leda is switched-on - Do not switch-on the A.leda with flat cable disconnected Opening the covers - Fig. 11 Removing/Assembling the lens unit - Fig. 12 A.LEDA B EYE...

  • Page 19: Accessories

    Replacing the line actuator - Fig. 13 ACCESSORIES 300300/001 A.Leda B-Eye K10 293300/001 A.Leda B-Eye K20 To minimize the penetration of solid bodies inside the fixture, it is available as an accessory, a grid with a mesh size small - Fig. 14 A.LEDA B EYE...

  • Page 20: Technical Information

    TECHNICAL INFORMATION Power supplies available 100-240V 50/60Hz (13.78") Zoom OUT A.Leda B-EYE K10 Input power (9.17") (12.20") Zoom OUT Zoom IN • K20 - 750VA (7.44") (9.76") • K10 - 450VA Zoom IN Total output (14.17") B-EYE K10: 5500 lumens (16.65") B-EYE K10 Easy: 4800 lumens B-EYE K20: 9800 lumens...

  • Page 21: Channel Functions

    CHANNEL FUNCTION A.LEDA B-EYE K10 EASY BASIC ENGINE PIXEL ENGINE STANDARD SHAPES Pixel Engine need to be enabled through the FUNCTION channel (bit 103-105). CHAN- CHAN- CHANNEL MODE CHANNEL MODE RGBW Red fine Red fine CHAN- CHAN- CHANNEL MODE CHANNEL MODE Green Green Red LED 1...

  • Page 22: Basic Engine

    A.LEDA B-EYE K10 BASIC ENGINE PIXEL ENGINE STANDARD SHAPES Pixel Engine need to be enabled through the FUNCTION channel (bit 103-105). CHAN- CHAN- CHANNEL MODE CHANNEL MODE RGBW Red fine Red fine CHAN- CHAN- CHANNEL MODE CHANNEL MODE Green Green Red LED 1 Red LED 1 Green fine...
  • Page 23 A.LEDA B-EYE K20 BASIC ENGINE PIXEL ENGINE STANDARD SHAPES Pixel Engine need to be enabled through the FUNCTION channel (bit 103-105). CHAN- CHAN- CHANNEL MODE CHANNEL MODE RGBW Red fine Red fine CHAN- CHAN- CHANNEL MODE CHANNEL MODE Green Green Red LED 1 Red LED 1 Green fine...
  • Page 24 NOTE: On conclusion of resetting in case of absence of DMX signal, Pan & Tilt move to the Home position (Pan 128 bit - Tilt 128 bit ) all the others channels stay at 0 bit. • RED • MACRO COLOUR GREEN BLUE BIT VALUE...
  • Page 25 • STOP STROBE FOREGROUND STROBE BACKGROUND STROBE • TILT • TILT FINE EFFECT 252 - 255 OPEN RANDOM FAST STROBE 239 - 251 226 - 238 RANDOM MEDIUM STROBE 213 - 225 RANDOM SLOW STROBE 208 - 212 OPEN FAST PULSATION (25 flash/sec) SLOW PULSATION (0,5 flash/sec) 104 - 107 OPEN...

  • Page 26: Zoom Rotation

    • RESET • RED LED 1 to… GREEN LED 1 to… EFFECT BLUE LED 1 to… COMPLETE RESET WHITE LED 1 to… EFFECT Complete reset is activated passing throug the unused range and staying 5 seconds in complete reset levels LED ON COMPLETE RESET PAN / TILT RESET...
  • Page 27 SHAPE SPEED - SHAPE OFFSET - SHAPE FADE - BACKGROUND SELECT Shape Shape Random BACKGROUND SHAPE OFFSET Macro Name Description Selection Slot colors *1 SELECT (*3)(*4) Macro OFF N.a. Pixel 1 N.a. For K10: Ring 1 0-7 = wash Ring 2 Static effects.
  • Page 28 Shape Shape Random BACKGROUND Macro Name Description SHAPE OFFSET Selection Slot colors *1 SELECT (*3)(*4) 0-255 → select Bar 2 (Variable N.a. Linear fade size) shape width 0-255 → select Random Linear fade and wake explosion random distribution 0-255 → select length Segment 2 shape width...

  • Page 29: Background Select

    • SHAPE FADE • SHAPE TRANSITION EFFECT EFFECT 4 sec 246-255 Smooth, fading curve with automatic gamma * Smooth, fading curve gamma 2 Smooth, fading curve gamma 1,986 Smooth, fading curve gamma 1,993 3 sec 2 sec 1 sec 0,5 sec Smooth, fading curve gamma 0,513 100 ms Smooth, fading curve gamma 0,506...
  • Page 30 A.LEDA B-EYE K10 & K10 EASY LED reference number for pixel mapping TILT: channel 16 @ 200 bit A.LEDA B-EYE K20 LED reference number for pixel mapping TILT: channel 16 @ 200 bit A.LEDA B EYE...
  • Page 32 CLAY PAKY - Via Pastrengo, 3/b - 24068 Seriate (BG) Italy - Tel. +39-035-654311 - Fax +39-035-301876 - www.claypaky.it S.p.A.

This manual is also suitable for:

C61419C61420

Table of Contents