Aircat 1000-TH Operating Instructions

1/2"

Table of Contents

Download this manual

MODEL: 1000-TH

1000-TH-2 (EXT. ANVIL)

1/2" IMPACT WRENCH

Table of Contents

Need help?

Do you have a question about the 1000-TH and is the answer not in the manual?

Page 1 MODEL: 1000-TH 1000-TH-2 (EXT. ANVIL) 1/2" IMPACT WRENCH...
Page 2: Air Supply
Torque Size Inlet (RPM) Per Minute (ft-lb) (lbs.) (in) (CFM) (in.) (in.) Setting (ft-lb) (in.) (in.) 1000-TH 8,000 9/16 1300 4.50 1/4 NPT 1000-TH-2 8,000 9/16 1/2 x 2 1300 4.75 1/4 NPT Air Supply Tools of this class operate on a wide range of air pressure. It is recommended that air pressure of these tools measures 90 PSI at the tool while running free. Higher pressure and unclean air will shorten the tool’s life because of faster wear and may create a hazardous condition and void the warranty.
Page 3 MODEL: 1000-TH 1000-TH-2 (EXT. ANVIL) 1/2" IMPACT WRENCH Part Number Description Part Number Description Qty. 305Q-002B Hammer Case 305F-030 Rear Gasket 00-4302 Inserts Recoil 305F-031 Washer 00-4603 Grease Fitting 305F-019 Air Channel Gasket 305H-010 Anvil Bushing 305Z-001 Motor Housing 305P-020-B...
Page 4 AIRCAT and NITROCAT air tools are warranted to be free from defects in material and workmanship for 2 years from date of purchase. We will repair or replace; at our option any defective part or unit which proves to be defective in material or workmanship during this 2 year period.

1000-th-2