TP-Link TL-WR802N Quick Installation Manual page 37

3. Les SSID et BSSID sont automatiquement complétés dans les
champs de paramétrage correspondants. Sélectionnez le Key
type (Type de clé) et saisissez le Password (Mot de passe).
Cliquez sur Next (Suivant) puis Reboot (Redémarrer).
Remarque : Après le redémarrage, reconnectez-vous au réseau en suivant la
procédure « Connexion sans fil instantanée ».
Quick Setup - Wireless
Start >> Working Mode >> Wireless >> Network Settings >> Finish
Client Setting
SSID:
BSSID:
Survey
Key Type:
None
WEP Index: 1
Auth Type: open
Password:
AP Setting
Local SSID: TP-LINK_C5FC
Wireless Security Mode: No Security
If you choose No Security mode, the wireless stations will be able to connect
the AP without encryption. It is recommened strongly that you choose one of
following options to enable security.
Quick Setup - Wireless
Start >> Working Mode >> Wireless >> Network Settings >> Finish
Client Setting
SSID:
TP-LINK_Network
BSSID:
94-0C-6D-2F-3C-BE
Survey
Key Type:
WPA-PSK/WPA2-PSK
WEP Index: 1
Auth Type: open
Password:
12345670
AP Setting
Local SSID:
TP-LINK_2046F2
Wireless Security Mode: Most Secure (WPA/WPA2-PSK)
Wireless Password:
12345670
You can enter ASCII or Hexdecimal characters. For hexdecimal, the length should
be between 8 and 64 characters; for ASCII, the length should be between 8 and 63
characters. For good security it should be of ample length and should not be a
commonly known phrase.
Example: 00-1D-0F-11-22-33
Back Next
Example: 00-1D-0F-11-22-33
Back Next
35
Français