TP-Link TL-WR802N Quick Installation Manual page 20

English
Connection, and select Properties.
> Double click Internet Protocol Version 4 (TCP/IPv4) in the
list.
> Set the TCP/IP Protocol to Obtain an IP address
automatically, then click OK.
* For Windows 8:
> Go to Metro Interface -> Control Panel -> View network
status and tasks -> Change adapter settings.
> Right click Wireless Network Connection or Local Area
Connection, and select Properties.
> Double click Internet Protocol Version 4 (TCP/IPv4) in the
list.
> Set the TCP/IP Protocol to Obtain an IP address
automatically, then click OK.
* For Mac OS:
> Click the Apple icon on the upper left corner of your
screen.
> Go to System Preferences -> Network.
> Select Airport from the left menu bar and then click
Advanced for wireless configuration, or Ethernet for wired
configuration.
> Set Configure IPv4 to Using DHCP, then click Apply.
6 What can I do if my signal strength is low?
Low signal strength can be caused by obstruction from walls
or objects. If you are receiving low signal strength, try to
place your TL-WR802N in a higher location, keeping it away
from obstructed locations like under or behind a desk.
Generally speaking, putting your TL-WR802N in a location
central to your home will maximize your signal coverage.
18