Air Handling Parts; Air Guide And Blower; Fan - LG BWC076GBAA0 Service Manual

2.2 AIR HANDLING PARTS

2.2.1 AIR GUIDE AND BLOWER

1. Remove the front grille. (Refer to section 2.1.1)
2. Remove the cabinet. (Refer to section 2.1.2)
3. Remove the control box. (Refer to section 2.1.3)
4. Remove the 4 screws which fasten the brace.
5. Remove the brace.
6. Remove the 2 screws which fasten the evaporator.
7. Move the evaporator high side forward and pulling
it upside slightly. (See Figure 4)
8. Move the evaporator sideways carefully.
9. Pull out upside hook of orifice by pushing the tabs
and remove it. (See Figure 5)
10. Remove the clamp with hand plier which secures
the blower.
11. Remove the blower.
12. Remove the 4 screws which fasten the air guide
from the barrier.
13. Move the air guide backward and pulling out from
the base pan
14. Re-install the components by referring to the
removal procedure, above.

2.2.2 FAN

1. Remove the cabinet. (Refer to section 2.1.2)
2. Remove the brace (Refer to section 2.2.1)
3. Remove the 4 screws which fasten the condenser.
4. Move the condenser sideways carefully.
5. Remove the clamp which secures the fan.
6. Remove the fan. (See Figure 6)
7. Re-install by referring to the removal procedure.
Figure 4
Figure 5
Figure 6
—6—
4 5
3 6
Off
2 7 Med
Fan
High
1 8 Coo l
Th erm 9
os tat Low
Fan
Med
Low Coo l
Op era Coo l
tio n