Table of Contents
Advertisement
Use and Care Manual
Wellness for Home
Press this button once to activate the kneading function for a full back massage at medium
strength. Press again to stop the kneading function and activate the kneading+Tapping,
Kneading +Shiatsu, Kneading + Clapping multi-massage function.
15. Tapping/Shiatsu
Tapping/Shiatsu function Start/Stop Control Button- 3 sizes of width, 3 levels of speed to be
adjusted.
Press this button once to activate the tapping function for a full back massage at medium speed.
Press again to stop the tapping function and activate the shiatsu function. Press the third time to
stop both.
16. Clapping/Rolling
Clapping/Rolling function Start/Stop Control Button- 3 sizes of width, 3 levels of speed to be
adjusted.
Press this button once to activate the clapping function for a full back massage at medium speed.
Press again to stop the clapping function and activate the rolling function. Press the third time to
stop both.
When you choose one of the above back massage functions, the corresponding LED will light.
17. Strength
The Adjustment Button for Kneading Strength
After activating the Kneading function, every time the button is pressed, the strength can be
adjusted in the cycle.
Note: Lowest and medium strength is suitable for most people and is advisable. You can choose
the highest strength according to your need.
18. Speed
The Speed Adjustment Button for Tapping, Clapping and Shiatsu Mode.
After activating the Tapping, Clapping or Shiatsu function, every time the button is pressed, the
speed can be adjusted in the cycle.
19. Width
The Width Adjustment Button for Tapping, Clapping, Shiatsu, Rolling Mode.
After activating the Tapping, Clapping, Shiatsu or Rolling function, every time the button is
pressed, the width can be adjusted in the cycle.
20. Spot
The Spot Back Massage
This button allows user to select Spot massage for any part on the back. Press this button once
to activate spot massage while the original massage mode continues to run at the original
position. Press again to cease Spot massage function and resume full back massage function.
Note: Spot massage function can not be activated when Rolling.
21. Partial
The Partial Back Massage
This button allows user to select Partial Massage for any part of the back. The position for Partial
Massage can be adjusted, as a user friendly method of Localized Massage.
Press this button once to continue the original massage mode, while activating Partial Massage,
which takes the original position as the centre to perform Partial Massage with the width of
approx. 3.15 inches. Press again to stop Partial Massage function and resume full back
massage function.
22. Upward & Downward
Position Adjustment Button for Spot or Partial Massage.
This Button is used for adjusting backrest massage position to achieve spot massage. When the
massage functions are activated, hold the joystick up or down to move the massage rollers
upward or downward until the rollers to ideal position. And then release the joystick to get the
spot massage function. Press Spot key to eliminate spot function.
Also, under Partial mode, hold the joystick up or down to adjust the center with the width of
approx. 3.15 inches. Press Partial key to eliminate partial function.
2) Localized Air Massage Program
23. Lumbar & Seat- 3 levels of intensity to be adjusted
Lumbar and Seat Air-pressure Start/Stop Control Button
Press once to activate Lumbar and Seat Air-pressure massage mode. Press again to stop the
function.
14/15
Advertisement
Table of Contents
