Table of Contents
Advertisement
Use and Care Manual
Wellness for Home
Control Buttons for the Massage Chair
1. ON/OFF
The Start/Stop Control Button
Press this button and the backlight of the Remote Control will start blinking: the chair is in idle
mode. Press any massage function button to start massage. This will initiate the timer function.
Press this button again to stop all massage functions, massage chair will return to its original
position.
2/3. Recline Leg
/Sit Up
Angle Adjustment Control Button for Calve
These two control buttons can adjust massage angle on Leg rest.
You may adjust the position by hold the Recline Leg
leg rest is at your desired angle, releasing the button to confirm the massage angle.
4/5. Recline
/Sit up
Angle Adjustment Control Button for Massage Chair
These two control buttons can adjust the Reclining and Sit up angle respectively. You may
adjust the position by hold the Recline
or Sit Up
desired angle, releasing the button to confirm the massage angle.
6. The Pause Button
When the chair is in massage mode and the user wants to temporarily pause it, press the
Pause button and all massage functions will stop. The "Pause" icon will be blinking on the
Liquid Crystal Display and the set time countdown will be paused as well. The chair is now in
idle mode. Only the "ON/OFF", Pause, Recline, Sit Up, Lift Leg, Recline Leg" can be used.
Press the Pause button again to immediately cease the "Pause" function and resume the
original massage function. The Countdown continues.
or Lift Leg
control button until the
control button until chair is at your
7. ZGR
Press this button to activate the ZGR function. Press the button again to stop the ZGR
massage function.
8. Timer
The Timer's Time Interval
After the massage process is activated, the chair will be automatically set on a 15-minute
Timer. Subsequently, every time the "TIMER" button is pressed, the Timer's interval will be
changed in the sequence of "20>25>30>5>10>15" minutes.
When there is only 1 minute remaining in the set time, 10 times of beep will be heard to alert
the user.
A.FULL BODY AUTO PROGRAM
Once one of the five Auto Programs is activated, the machine will automatically do a height
scan for the back.
The following are the Auto Programs available:
9. Comfort
10. Stretch
11. Healthcare
12. Relax
13. Full Air
B. LOCALIZED AUTO PROGRAM
This program gives precise massage at the exact part of the body for better
localized-massage effect.
14. Kneading/Kneading + Clapping
Kneading/Kneading + Clapping function Start/Stop Control Button- 3 strength levels/3 strength
levels and 3 levels of speed to be adjusted.
12/13
Advertisement
Table of Contents
