Advertisement
2
3
In addition, there is a RESTORE button available on the front panel.
Insert a paper clip if a restore is required.
• A brief, momentary press: To delete a downloaded configuration and reboot.
• Press and hold for more than 10 sec: To force the unit into a full factory restore.
Management Port
This port is designed to access the local switch configuration page only. For more information on local configuration,
please see
Local
Configuration.
The management port can not be used as a standard switched port
Status
Switch Port LEDs
Orange
Flashing green
White
Alternating
Off
Off
Solid orange
Solid green
Switch is unable to or
has not yet connected
to the Meraki cloud
Firmware upgrade in
process
Switch is fully
operational and
connected to the
Meraki cloud
Switch is booting,
searching for uplink to
Meraki Cloud
Switch does not have
power
No client connected
10/100/1000 Mbps
10,000 Mbps (10Gbps)
3
Advertisement
