Searching For A Location By The Coordinates; Searching For A Location By Scrolling The Map - Pioneer AVIC-F70BT Operation Manual

Chapter
05 Searching for a destination
Searching for a location by
the coordinates
Entering a latitude and longitude pinpoints
the location.
1 Press the MAP button.
The Map screen appears.
2 Touch the following key.
3 Touch [New Route].
The "New Route to..." screen appears.
4 Touch to show the next page.
5 Touch [Coordinates].
The "Coordinates" screen appears.
6 Enter the latitude value and touch
[OK].
p When a value is already entered in the text
field, touch
first.
p You can change the display format of the la-
titude and longitude to any of the following
formats: decimal degrees; degrees and dec-
imal minutes; or degrees, minutes and deci-
mal seconds.
# When entering the coordinates in UTM for-
, then [UTM Coordinates].
mat, touch
7 Enter the longitude value and touch
[Go!].
p When a value is already entered in the text
field, touch
first.
The searched location appears on the Map
screen.
8 Touch [Select as Destination] on the
"Map Location" screen.
= For details on the operations in the "Map
Location" screen, refer to Using the "Map
Location" screen on page 43.
42
Engb
Displays the navigation menu on
the Map screen.
or to delete the value
or to delete the value
After touching [Select as Destination], the
"Route Summary" screen appears and count-
down begins. When the countdown ends, the
guidance automatically starts. If the screen is
touched anywhere during the countdown, the
countdown stops and the screen will stay as it
is.
= For details on the operations in the "Route
Summary" screen, refer to Checking route
information and preferences on page 46.
9 Touch [Start Navigation].
Your navigation system starts the route gui-
dance.
= For details of the route guidance, refer to
Understanding the route guidance on page
32.
Searching for a location by
scrolling the map
Specifying a location after scrolling the map
enables you to set the position as a destina-
tion or waypoint.
1 Press the MAP button.
The Map screen appears.
2 Touch and drag the screen to scroll the
map to the position you want.
3 Touch the location that you want to se-
lect as your destination.
The cursor appears.
4 Touch [Select as Destination].
After touching [Select as Destination], the
"Route Summary" screen appears and count-
down begins. When the countdown ends, the
guidance automatically starts. If the screen is
touched anywhere during the countdown, the
countdown stops and the screen will stay as it
is.
= For details on the operations in the "Route
Summary" screen, refer to Checking route
information and preferences on page 46.