Editing The Stored Alert Points - Pioneer AVIC-F70BT Operation Manual

Chapter
07 Registering and editing locations and routes
= For details, refer to "Warnings" settings on
page 61.
1 Press the MAP button.
The Map screen appears.
2 Scroll the map and select a location.
The cursor appears at the selected point.
3 Touch the following key.
# To edit a previously saved alert point, touch
.
4 Touch [Add Alert Points].
The "Add New Alert Point" screen appears.
5 Set the necessary parameters.
! Alert Type:
Sets the type of the alert point.
! Speed Limit:
Sets the speed limit for this alert point (if
applicable).
! Direction:
Sets the direction from which you expect
the alert to come from.
6 Touch [Save].
The location is saved as a new alert point.
= For details, refer to "Warnings" settings on
page 61.

Editing the stored alert points

Stored alert points can be edited later.
1 Press the MAP button.
The Map screen appears.
52
Engb
Displays the shortcuts.
2 Scroll the map to the stored alert point.
3 Touch the following key.
Displays the shortcuts.
4 Touch [Edit Alert Points].
5 Set the necessary parameters.
# If you touch and then touch [Delete], the
selected alert point will be deleted.
6 Touch [Edit].
The alert settings are modified.