Backup Device - Konig SEC-DVR304 User Manual

Standalone DVR SEC-DVR304 User Manual

7.5 Backup Device

In Menu display, press ▲▼ to change the highlighted option to Backup Device,
and then press ENTER to call up Backup Device display as shown below.
This window allows user to view the connection status of the backup device and to
initiate data backup.
1
▲▼◄►
Press these buttons to select the items.
ESC
Press this button to escape from this screen, and return to MENU display.
Name
1 Devices
2 Status
3 Configuration
2
Description
Display a list of supported storage devices.
NOTE: USB CD-RW is not supported by this standalone DVR system.
Display the connection status of external storage device.
Connect/Disconnect–If the specific backup device is disconnected
(as shown in Current Status), please plug the USB device in one of
the USB ports of the system and/or insert a DVD for DVD device, and
then press ENTER (Mouse: Left click)
connect with the device. If the specific device is already connected
(EX. Read/write, as shown in Current Status), please press ENTER
(Mouse: Left click)
to command the system software to disconnect
with the device, and then unplug the backup device from the backup
port.
NOTE: IF you unplug USB Mouse while DVR is on, the USB Mouse
would not work even if you plug in the USB mouse again. Please
reboot Standalone DVR with USB mouse plug in. Access to BACK
Device operation, press ENTER to command the system to connect
with the device.
Click Backup (Mouse: Left click)
external storage device. For software V6.13 or above, you may
specify the directory to backup the configurations to.
Click Restore (Mouse: Left click)
external device to the local system.
you may specify the directory to restore the configurations
from.
29
3
to command the system to
to store the data files to an
to restore the data files from the
For software V6.13 or above,