Basic Connections - Konig SEC-DVR304 User Manual

Standalone DVR SEC-DVR304 User Manual
4.5

Basic Connections

Please refer to the following diagram for the connections.
Please make sure to set the NTSC/PAL Selector Switch on the main board according to the
local TV system for the system to work correctly.
Cameras
Connect the camera video input connectors to the video outputs from system cameras or
other composite video sources via coaxial cables. The internal 75
ON.
Main monitor
Connect the main monitor output connector (BNC) to a surveillance TV monitor, or connect
the optional VGA output connector to a VGA monitor. The TV/VGA monitor displays
selected live or recorded cameras in any available split window format.
Audio inputs
Connect the audio input connectors to the audio line-outs from system cameras or other audio
sources. Please make sure to associate the audio inputs with the cameras in Camera Setup
as described in
Audio output
Connect the audio output connector to the audio line-in from speakers.
Alarm inputs
Connect the alarm inputs to NC and/or NO type of alarm signals. Please make sure to setup
the alarm configurations in Alarm Setup as described in
Alarm outputs
Connect the alarm outputs 1-2 to NC type of alarm signals, alarm outputs 3-4 to NO type of
alarm signals.
Section 7.6.2 Camera accordingly.
Section 7.6.3 Alarm
15
termination is always
accordingly.