Panasonic BL-C1A Operating Instructions Manual page 49

Setting
Time Setting
Automatic Time
Adjustment
Adjust Clock for
Daylight Saving
Time
3.
Click [Save] when finished.
• The new settings are saved.
• When finished, "Success!" is displayed.
4.
Click [Go to Date and Time page].
• The Date and Time page is displayed.
Note
Date and time settings become incorrect depending on the length of time the
camera is turned on and its internal temperature. Using the Automatic Time
Adjustment is recommended.
• Set the date and format (AM/PM or 24 H). The interface and available
values depend on the format. The date and time are used for the
settings of the trigger setting, sensor log, operation time and Buffered
Image page. Note that the format for the subject and file name of E-
mails by E-mail or FTP transfer can only be 24 h.
• NTP (Network Time Protocol) server synchronizes the camera's
internal clock automatically every day. Check the box to enable it.
• Set the NTP server IP address. Set 4 numbers (0—255)
and 3 periods, such as "192.168.0.253". Note that "0.0.0.0"
and "255.255.255.255" are not available. Set a host name
(1—255 characters). Note that [Space], ["], ['], [&], [<] and
[>] are not available.
• Select your time zone.
Note
The camera will not synchronize to the NTP server if there
is more than a 1 hour difference between the NTP server
time and the camera's current time. This is to protect the
camera's time setting from fraudulent NTP server
tampering, incorrect time information, etc.
• During daylight saving time, the internal clock is turned
forward an hour. The clock will shift one hour forward at the
set time on the Start Day, and move back one hour at the
set time on the End Day. Check the box to enable it.
Note
An "s" is inserted between the date and time of the time stamp
when this feature is enabled. The time stamp is printed on
images transferred by the Image Transfer feature.
[For assistance, please call: 1-800-272-7033]
Description
Operating Instructions
49