Using Upnp™ (Universal Plug And Play) - Panasonic BL-C1A Operating Instructions Manual

2.4 Using UPnP™ (Universal Plug and Play)
UPnP can automatically configure your router to make it accessible from the
TM
Internet. In order to use this feature, your router needs to support UPnP
must be enabled. UPnP
panasonic.net/pcc/support/netwkcam/ and your router's manual for details of
how to enable UPnP
port forwarding.
1.
Click [UPnP] on the Setup page.
2.
Set up UPnP.
Setting
Auto Port
Forwarding
Display Shortcut
Icon in My
Network Places
is disabled on most routers by default. See http://
TM
. After UPnP
TM TM
• If the network setting is [Static] or [DHCP], enabling auto
port forwarding allows you to access the camera from the
Internet.
Note
If the network setting is [Automatic Setup], also enable
[Allow Access from the Internet] on the Network page (see
page 33).
• Enabling this creates a shortcut to the camera in the My
Network Places folder.
Note
To enable this feature when using Windows XP or
Windows Me, enable the UPnP
beforehand (see page 131).
[For assistance, please call: 1-800-272-7033]
is enabled on the router, set [Enable] for auto
Description
Operating Instructions
Windows component
TM
, and it
TM
39