Mounting A Wireless Microphone; Connecting An Audio Component - Panasonic AJ-PD900WP Operating Instructions Manual

Mounting a Wireless Microphone

Connecting an Audio Component

When using the Panasonic wireless microphone system, mount the WX-RA700 wireless re-
ceiver.
AUDIO IN switch:
Set the AUDIO IN switch of
the channel to which the
audio signal source is
connected to REAR [LINE].
When detaching the
wireless microphone,
press up the lever on the
bottom of the camera
attachment (1) and detach
the microphone in the
upward direction (2).
¡See the Handling Instructions for the WX-RA700 wireless receiver for wireless receiver ope-
rations.
When using an audio component as the line input signal source, connect the audio component
to the unit's AUDIO IN CH1/CH2 connectors.
AUDIO IN Switch:
Set the AUDIO IN Switch of
the channel to which the
audio signal source is
connected to REAR [LINE].
To the AUDIO OUT Connector
WX-RA700
Wireless Receiver
WX-R980
Camera Attachment
Connect to the AUDIO IN CH1
or CH2 Connector.
Connect to the AUDIO IN
CH1/CH2 Connectors.
– 41 –
XLR Cable
Lever
AJ-PD900W Main Unit
Audio Equipment