Panasonic AJ-PD900WP Operating Instructions Manual page 107

MAIN FUNCTION Screen
This page performs the adjustment function settings.
- MA I N FU NC T I O
E
REC MODE : 1 6
¢
PB MODE : A U T
RE T SW : REC
BATT/TAPE ALARM Screen
The battery end and tape end audio warnings during shooting can be switched off if they become undesirable.
- BA T T / T APE A L ARM -
BA T T NEAR END
¢
BA T T END
T APE NEAR END
T APE END
The underlined setting in the Variable range column indicates the preset mode.
Menu screen display methods
USER menu: Setting the MENU switch to SET displays the USER menu.
ENG menu: Holding down the SHIFT/ITEM and UP buttons simultaneously and setting the MENU switch to SET displays
the ENG menu.
N -
Item
9 / P
O
REC.MODE
CHECK
PB MODE
RET SW
Item
: OF F
: ON
BATT NEAR END
: OF F
: ON
BATT END
TAPE NEAR
END
TAPE END
Variable
VF
range
display
16E9/P ENG
4E3/P
16E9/50I
4E3/50I
16E9/25I
4E3/25I
AUTO ENG
P
50I
25I
REC ENG
CHECK
CAM
RET
Variable VF
range display
ON ENG
OFF
ON ENG
OFF
ON ENG
OFF
ON ENG
OFF
– 107 –
Remarks
The mode for recording the signals
onto the VTR is selected.
16E9/P: 525P (16:9) signals are
recorded at 50 Mbps.
4E3/P: 525P (4:3) signals are
recorded at 50 Mbps.
16E9/50I: 525I (16:9) signals are
recorded at 50 Mbps.
4E3/50I: 525I (4:3) signals are
recorded at 50 Mbps.
16E9/25I: 525I (16:9) signals are
recorded at 25 Mbps.
4E3/25I: 525I (4:3) signals are
recorded at 25 Mbps.
The playback mode is selected.
AUTO: The recording mode is
automatically detected, and the
recording is played back in the mode
detected.
P: Progressive mode.
50I: 50M (interlace) mode.
25I: 25M (interlace) mode.
This selects the RET SW function.
REC CHECK: The REC CHECK
operation is performed.
CAM RET: The return signal output
operation is performed.
Remarks
Battery near end audio ON/OFF
Battery end audio warning ON/OFF
Tape near end audio warning ON/OFF
(A warning is given 3 minutes before
the tape end.)
Tape end audio warning ON/OFF