ZyXEL Communications NBG6716 User Manual page 77

Figure 50 Network > WAN > Internet Connection: IPoE Encapsulation
The following table describes the labels in this screen.
Table 27 Network > WAN > Internet Connection: IPoE Encapsulation
LABEL DESCRIPTION
ISP Parameters for Internet Access
Encapsulation You must choose the IPoE option when the WAN port is used as a regular Ethernet.
IP Address
Obtain an IP Select this option If your ISP did not assign you a fixed IP address. This is the default
Address selection.
Automatically
Static IP Address Select this option If the ISP assigned a fixed IP address.
IP Address Enter your WAN IP address in this field if you selected Static IP Address.
Subnet Mask Enter the Subnet Mask in this field.
Gateway IP Enter a Gateway IP Address (if your ISP gave you one) in this field.
Address
MTU Size Enter the MTU (Maximum Transmission Unit) size for each packet. If a larger packet
arrives, the NBG6716 divides it into smaller fragments.
DNS Server
Chapter 10 WAN
NBG6716 User's Guide
77