ZyXEL Communications NBG6716 User Manual page 48

Table 21 Navigation Panel: Router Mode (continued)
LINK TAB
Remote WWW
Management
Telnet
Wake On LAN
UPnP General
USB Media DLNA
Sharing
SAMBA
FTP
MAINTENANCE
General General
Password Password
Setup
Time Time Setting
Firmware Firmware
Upgrade
Upgrade
Backup/ Backup/
Restore
Restore
Restart System
Restart
Language Language
Sys OP Mode Sys OP Mode
Chapter 6 Router Mode
FUNCTION
Use this screen to configure through which interface(s) and from which IP
address(es) users can use HTTP to manage the NBG6716.
Use this screen to configure through which interface(s) and from which IP
address(es) users can use Telnet to manage the NBG6716.
Use this screen to enable Wake on LAN to remotely turn on a device on the
local network.
Use this screen to enable UPnP on the NBG6716.
Use this screen to have the NBG6716 function as a DLNA-compliant media
server, that lets DLNA-compliant media clients play video, audio, and photo
content files stored on the connected USB storage device.
Use this screen to enable file sharing through the NBG6716.
Use this screen to have the NBG6716 act as a FTP server.
Use this screen to view and change administrative settings such as system
and domain names.
Use this screen to change the password of your NBG6716.
Use this screen to change your NBG6716's time and date.
Use this screen to upload firmware to your NBG6716.
Use this screen to backup and restore the configuration or reset the factory
defaults to your NBG6716.
This screen allows you to reboot the NBG6716 without turning the power
off.
This screen allows you to select the language you prefer.
This screen allows you to select whether your device acts as a router, or an
access point.
NBG6716 User's Guide
48