ZyXEL Communications NBG6716 User Manual page 102

Figure 67 Network > Wireless LAN 2.4G/5G > WPS
The following table describes the labels in this screen.
Table 41 Network > Wireless LAN 2.4G/5G > WPS
LABEL DESCRIPTION
WPS Setup
WPS Select Enable to turn on the WPS feature. Otherwise, select Disable.
PIN Code Select Enable and click Apply to allow the PIN Configuration method. If you select
Disable, you cannot create a new PIN number.
PIN Number This is the WPS PIN (Personal Identification Number) of the NBG6716. Enter this PIN in
the configuration utility of the device you want to connect to the NBG6716 using WPS.
The PIN is not necessary when you use WPS push-button method.
Click Generate to generate a new PIN number.
WPS Status
Status This displays Configured when the NBG6716 has connected to a wireless network using
WPS or when WPS Enable is selected and wireless or wireless security settings have
been changed. The current wireless and wireless security settings also appear in the
screen.
This displays Unconfigured if WPS is disabled and there are no wireless or wireless
security changes on the NBG6716 or you click Release Configuration to remove the
configured wireless and wireless security settings.
Release This button is only available when the WPS status displays Configured.
Configuration
Click this button to remove all configured wireless and wireless security settings for WPS
connections on the NBG6716.
802.11 Mode This is the 802.11 mode used. Only compliant WLAN devices can associate with the
NBG6716.
SSID This is the name of the wireless network (the NBG6716's first SSID).
Security This is the type of wireless security employed by the network.
Chapter 11 Wireless LAN
NBG6716 User's Guide
102