ZyXEL Communications NBG6716 User Manual page 147

Use this screen to remotely turn on a device on the network. Click the Management > Remote
MGMT > Wake On LAN to open the following screen.
Figure 102 Management > Remote MGMT > Wake On LAN
The following table describes the labels in this screen.
Table 63 Management > Remote MGMT > Wake On LAN
LABEL
Wake On LAN over WAN
Settings
Enable WOL over WAN
Port
Wake On LAN
Wake MAC Address
Start
Apply
Cancel
Chapter 20 Remote Management
DESCRIPTION
Select this option to have the NBG6716 forward a WoL "Magic Packet" to all
devices on the LAN if the packet comes from the WAN or remote network and
uses the port number specified in the Port field. A LAN device whose hardware
supports Wake on LAN then will be powered on if it is turned off previously.
Type a port number from which a WoL packet is forwarded to the LAN.
Enter the MAC Address of the device on the network that will be turned on.
A MAC address consists of six hexadecimal character pairs.
Click this to have the NBG6716 generate a WoL packet and forward it to turn
the specified device on.
A screen pops up displaying MAC address error if you input the MAC address
incorrectly.
Click Apply to save the setting to the NBG6716.
Click Cancel to begin configuring this screen afresh.
NBG6716 User's Guide
147