Audio Input Preparations
Using the Microphone not Mounted to the Main Unit
Using the Microphone not Mounted to the Main Unit
To the MIC IN Connector
Note
When extending the microphone, use a cable which supports the phantom power supply type of
microphone.
AUDIO IN Switch: Set the AUDIO IN Switches
of the channels to which
microphones are
connected to REAR [MIC].
AUDIO IN switch: Set the AUDIO IN switch for
Up to two external microphones can be connected to
the AUDIO IN CH1/CH2 Connectors.
Phantom power supply type microphones can also be
supported by a menu setting.
– 39 –
the audio channel you wish to
record to FRONT [MIC].