Panasonic AJ-D400 Operating Instructions Manual page 13

Controls and Their Functions
Audio Function Section (3)
Audio Function Section (4)
z
{
|
ALARM (warning tone volume) control
This adjusts the warning tone volume heard from the speaker
to the PHONES jack . When it is set to the lowest position, the warning tone is not audible.
However, by making changes to the inside parts, the tone can be made audible even when
the control is at its lowest position.
MONITOR (volume) control
This adjusts the volume of the sound other than the warning tone—the sound from the
speaker or earphone . When it is set to the lowest position, no sound is heard.
Speaker
During recording, the EE sound can be monitored; during playback, the playback sound can
be monitored.
The warning tone is heard through the speaker in synchronization with the flashing or lighting
of the warning lamp and warning display.
The speaker sound is automatically muted when an earphone is connected to the PHONES
jack .
MONITOR SELECT (audio channel selector) switch
This selects the audio channel whose sound is to be heard through the speaker
phone.
CH1: The audio channel 1 sound is output.
CH1, 2: The sound produced by mixing the audio channel 1 and 2 sound or the stereo
sound is output. However, only the mixed sound is output from the speaker
CH2: The audio channel 2 sound is output.
MONITOR (sound selector) switch
This selects the sound of the earphone when CH1, 2 is selected with the MONITOR SELECT
switch .
ST: The stereo sound of audio channel 1 and 2 is output.
MIX: The mixed sound of audio channel 1 and 2 is output.
PHONES (earphone) jack (mini-jack)
When an earphone (option) is connected to this jack, the sound selected by the MONITOR
switch can be heard. The warning tones relating to the unit's operation or status can also
be heard. An earphone enabling a sufficiently high volume of sound to be heard is recom-
mended.
When the earphone is connected, speaker
– 13 –
v u
w
ü
y
sound is automatically muted.
t
~
}
x
or the earphone connected
or ear-
.