Clearing A Macro Function - Yamaha RX-V663 Owner's Manual

Remote control features

■ Clearing a macro function

You can clear the function programmed for a certain
macro button.
Set the operation mode selector to F AMP or
1
F SOURCE and then press C MACRO using
a ballpoint pen or similar object.
"MCR ?" appears in the display window ( 6 ) on the
remote control.
AMP
SOURCE
TV
or
AMP
SOURCE
TV
Note
If you do not complete each of the following steps within 30
seconds, the macro programming mode will be
automatically canceled. In this case, start over from step 1.
102
En
2
MACRO
3
• "C;NG" appears in the display window (
• "ERROR" appears in the display window (
Press and hold C CLEAR using a ballpoint
pen or similar object, then press the macro
button you want to clear for about 3 seconds.
"C;OK" appears in the display window ( 6 ) on the
remote control if clearing was successful.
V - AUX/DOCK
DTV/CBL CD MD/CD-R
DVD DVR VCR PHONO
OFF ON MACRO LEARN CLEAR RENAME
y
• If you continuously want to clear another function, repeat
step 2.
• Once you clear a programmed function, the button reverts
to the factory setting (or to the manufacturer setting if you
have set remote control codes).
Press C MACRO again to exit the macro
programming mode.
Notes
control if clearing was unsuccessful. In this case, start over from
step 2.
control if you press more than one button simultaneously.
6
) on the remote
6
) on the remote