Displaying The Radio Data System Information - Yamaha RX-V663 Owner's Manual

Displaying the Radio Data System
information
Use this feature to display the 4 types of the Radio Data
System information: PS (program service), PTY (program
type), RT (radio text) and CT (clock time). The
corresponding indicators light up in the front panel display
(see page 31).
Notes
• You can select one of the Radio Data System display modes
only when the corresponding Radio Data System indicator
lights up in the front panel display. It may take a while for this
unit to receive all of the Radio Data System data from the
station.
• You can select only the available Radio Data System display
modes being offered by the station.
• If the signals being received are not strong enough, this unit
may not be able to utilize the Radio Data System data. In
particular, the RT mode requires a large amount of data and may
not be available even when the other Radio Data System display
modes are available.
• In case of poor reception conditions, press H SRCH MODE on
the remote control repeatedly to select "MANUAL TUNING"
(see page 53).
• If the signal strength is weakened by external interference while
this unit is receiving the Radio Data System data, the reception
may be cut off unexpectedly and "...WAIT" appears in the front
panel display.
• When the RT mode is selected, this unit can display the
program information by a maximum of 64 alphanumeric
characters, including the umlaut symbol. Unavailable characters
are displayed with the "_" (underscore).
• If the reception is cut off when the CT mode is selected, "CT
WAIT" appears in the front panel display.
Before performing the following operations, set the operation
mode selector on the remote control to F SOURCE and then
press 5 TUNER.
1
Tune into the desired Radio Data System
broadcasting station.
• We recommend using the automatic preset tuning
to tune into the Radio Data System broadcasting
stations (see page 55).
• You can also use PTY SEEK mode to tune into the
desired Radio Data System broadcasting station
from the preset ones (see page 57).
Radio Data System tuning (Europe and Russia models only)
Press G INFO (or B INFO) repeatedly to
2
select the desired Radio Data System display
mode.
PROGRAM SERVICE
Program service (PS). Select this mode to display the
currently received Radio Data System program.
PROGRAM TYPE
Program type (PTY). Select this mode to display the
type of the currently received Radio Data System
program.
RADIO TEXT
Radio text (RT). Select this mode to display the
information of the currently received Radio Data
System program.
CLOCK TIME
Clock time (CT). Select this mode to display the current
time.
FREQUENCY
Select this mode to display the frequency and preset
group and number.
DSP PROG. INFO
Select this mode to display the currently selected sound
field program.
Back to "PROGRAM SERVICE"
59
En