Table of Contents
Advertisement
Appendix E
USB to RS485 Converter Driver Software Installation Instructions
5. Click on "Run."
6. When the console window goes away, the driver is ready.
7. Plug in the USB-RS485 cable, and the driver will load.
8. To determine which COM port was allotted by the system for this
USB-to-RS485 Converter; follow these steps:
a. Be sure the USB-to-RS485 converter is connected to your system.
b. On the desktop right click on the "My Computer" Icon.
c. Click on "Properties; the following window opens.
49
Advertisement
Table of Contents
