Seal
Accessories
2.
Raise the panel slightly and attach it at the top.
3.
Open the door fully, while holding the panels with
one hand.
4.
Screw in the screws using a slotted crewdriver
(blade width 8 11 mm). Close the door.
The oven must not be used again until the panels
have been correctly fitted.
Clean the seal on the oven door using detergent. Do
not use sharp or abrasive cleaning products.
Immediately after use, soak the accessories in
washing up liquid. Food residues can then be easily
removed with a brush or sponge.
55