Starting The Memory Function - Siemens HB86K58.B Instruction Manual

Replacing the memory
location
Starting the
Memory function
Example:
Memory location 1, 360 W,
7 minutes, hot air, 220 ºC
The cooking time has
elapsed
Pausing
If you want to replace the setting in a memory
location, select the memory location. The old settings
are displayed. Press the Stop button and select new
settings.
The stored settings for your dishes can easily be
called up.
Place the dish in the oven.
1.
Press the M" memory button. 1 appears for
memory location 1.
To change to a different memory location, press the
M" memory button again.
2.
Press the Start button.
The time counts down in the display.
A signal sounds. The oven switches off. The display
shows End time" or Oven cooling". Open the oven
door or press the Stop button.
Open the oven door. The cooling fan may run on.
Press the Start button again once you have closed the
door. The program will then continue.
If you forget to press the Start button, you will hear a
signal after three seconds. Press Start button"
appears in the display.
43