Rapid Heating; Setting Procedure - Siemens HB86K58.B Instruction Manual

To change the end time.
The cooking time has
elapsed
Cancelling the setting
Note

Rapid heating

Suitable types of heating

Setting procedure

The oven must not be switched on. Press the j
cklock button thrice and change the end time.
A signal sounds. The oven switches off. The display
shows End time" or Oven cooling". The clock
reappears in the display when you press the Stop
button.
Press the Stop button once.
You can change the setting while the symbol is
flashing.
The setting has been adopted if the symbol lights up
permanently.
In the meantime, you can call up the preset time,
duration and end time. To do so, press the j clock
button.
This allows you to heat up the oven particularly
quickly. The rapid heating function is not suitable for
all types of heating.
Top/bottom heating
Intensive heat
Hot air
3D hot air
The rapid heating function is also suitable for the types
of heating combined with microwave operation.
The set cooking time will only begin after the
preheating time has elapsed.
1.
Set the oven as required.
2.
Press the Z rapid heating button.
The Z symbol lights up in the display.
27