Huawei P8 GRA-UL00 Faqs page 45

P8 Smartphone FAQs
1.58 How can I reconnect the wrist band and my phone
after the Bluetooth connection is interrupted?
1.
2.
2015/03
− After the pairing between the phone and the B2 is released, you can perform the
following steps to re-pair them: press and hold the side button on the B2 for 3s; touch
the Bluetooth icon
Bluetooth on the phone and select HUAWEI B2-XXX in the Bluetooth list.
− The B2 can simultaneously connect to two phones. To connect the B2 to the second
phone, perform the following steps: press and hold the side button on the B2 for 3s;
touch the Bluetooth icon
the Bluetooth on the phone and select HUAWEI B2-XXX in the Bluetooth list of the
second phone. (Note: At this time, the B2 is disconnected from the first phone. You
can select HUAWEI B2-XXX in the Bluetooth list of the first phone. When digit "2"
is displayed in the lower right corner of the Bluetooth icon on the B2, the B2 is
successfully connected to two phones.)
− After the phone is connected to the Bluetooth device, open the Huawei Wear app and
enter the main interface under the guidance. Slide down on the main screen to
synchronize the data for the first time. After the synchronization is successful, the B2
time and information have been initialized. Then, you can use the B2 normally.
The wrist band is connected to only one phone
− The phone actively disconnects from the Bluetooth device (disabling the Bluetooth
function on the phone or manually disconnecting the connection).
− Within 3 min, if the Bluetooth function is enabled on the phone, the phone and the
wrist band are automatically connected.
− In 3 min, the Bluetooth function of the wrist band is disabled due to expiry, and you
need to press the side button on the wrist band to enable the Bluetooth function. Then,
the phone and the wrist band can be connected.
Disconnect the Bluetooth connection in see-saw manner:
− If the distance between the wrist band and the phone is restored within the specified
range within 20 min, the wrist band and the phone are automatically connected.
If the disconnection exceeds 20 min, the wrist band automatically disables the
−
Bluetooth function to save power. After the wrist band re-enters the Bluetooth
coverage area of the phone, you can press the side button on the wrist band to awaken
the Bluetooth function, so that the wrist band can connect to the phone.
The wrist band is connected to two phones
If the Bluetooth function of one phone actively disconnects from the wrist band, the
Bluetooth function of the phone is automatically connected to the wrist within 3 min. In
3 min, you need to press and hold the button on the headset for 3s and select the
Bluetooth icon to connect the phone and the wrist.
Both phones actively disconnect the Bluetooth simultaneously.
−
Within 3 min, if the Bluetooth function is enabled on both phones, the phones and the
wrist band are automatically connected. If one phone is connected to the wrist band
but the other one is not, within 3 min, the second phone have 3 min to automatically
connect to the wrist band. If the second phone fails to connect to the wrist band in 3
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
on the screen; when the icon starts blinking, enable the
on the screen; when the icon starts blinking, enable
2 Skytone
18