Interlink Instruction - Siemens ER95351HK Installation And Operation Instruction Manual

Gas burner operation

Interlink Instruction

ER95351HK
Switch off
White color
Activated
Fully light up
Standby
1/3 light up
19
First time use
Plug in the gas hob, the interlink symbol will flash for 3 seconds
and automatically enter to standby mode.
To connect the interlink function:
1) Plug in the cooker hood, press the option button
cooker hood for 3 seconds.
display. Notes: If the control panel is not activated for 10 second,
the interlink function will automatically enter standby mode.
2) While is still flashing on the cooker hood display, press
the left knob and
a long signal from the cooker hood and
3) If the connection between the gas hob and cooker hood is
successful, the indicator of interlink should light up to dark blue
for 10 seconds without any operation.
To operate interlink function:
1) Press the interlink button
2) Turn on the gas hob by using the desire control knob. Once
the gas hob is in operation and flame is on, the hob will send a
signal to the cooker hood request for turn on. The indicator light
will change from dark blue to turquoise color. (Note: The 'FAN
ON' signal will be sent to cooker hood as soon as any burner is
in operation, moreover the 'FAN OFF' signal will be sent to the
cooker hood when the last burner is turned off.
3) The cooker hood will continue to operate as long as the gas
hob is on. During cooking, the interlink indication will stay at
turquoise color.
4) When all burners are turned off and the thermocouple has
cool down, a 'FAN OFF' signal will be sent to the cooker hood.
The interlink indicator will be turned off from turquoise color to
dark blue. The cooker hood will turn to a low speed and run for
further 3 minutes, then off.
To deactive the interlink function:
1) Turn off all burners
2) Touch the interlink control and hold for 3 seconds but no more
than 8 seconds. Once the interlink indicator is off, the interlink
function is deactivated.
Note: The interlink indicator will automatically switch off once
the function has been deactived. After the interlink function has
been deactived, no 'FAN ON' signal will be sent to the cooker
hood when gas hob is being turned on, i.e. manual operation is
required to switch on the cooker hood.
To reactive the interlink function:
1) Touch the interlink control and hold for 3 seconds but no more
than 8 seconds.
2) The interlink function should be activated and the indicator will
go to turquoise color. If it is inactive for more than 10 seconds,
the interlink function will automatically goes to standby mode.
will flash on the cooker hood
together on the gas hob until you can hear
on the
on the gas hob.