Channel Master DVR+ User Manual page 26

Using the DVR+
Changing channels
You can change channels on your DVR+ in several ways:
• Press the CH+ or CH-
• Enter the channel number using the numeric keypad.
• To view the list of all currently available channels, press
GUIDE on the remote control. Highlight a current program on
a different channel, press
Controlling the sound from your TV
• Press the VOL+ or VOL-
raise or lower the volume on your TV.
• Press the MUTE button on the remote control to turn off the
sound on your TV; press
restore the sound.
Note: You must program you new Channel Master DVR+ remote
to control the VOL+ or VOL-
pages 10-15 for more information on programming your remote.
Controlling digital audio
Your new Channel Master DVR+ offers several digital audio
features to enhance your enjoyment of many programs and
events. Most of these options are in the Digital Audio Setup
submenu within the TV & Audio Setup menu under Settings:
Press MENU Navigate on the left to
on the remote. SETTINGS and press
:: Using the DVR+
20
button on the remote control.
OK and select Watch this program.
button on the remote control to
MUTE again or VOL+ or VOL-
and MUTE functions of your TV. See
OK .
Scroll the list of Settings to
highlight TV & Audio Setup
and press
If channels are missing
If there are subscription-
free over-the-air channels
in your local area that you
do not see listed in the
DVR+ program guide,
then try the following:
• Press
on the remote.
• Navigate on the left to
select SETTINGS.
• Scroll the list to select
Technical Information.
• Scroll the list to select
Signals and Network.
• Verify that your Signal
Strength and Signal
to Quality are both at
least 30.
• If not, then readjust
your OTA antenna.
If one channel is missing,
perform a Manual Scan
from the Tuning submenu.
If several channels are
missing, then perform a
Full Re-Scan instead.
Scroll the list of items to
highlight Digital Audio Setup
OK .
and press
MENU
OK .