Channel Master DVR+ User Manual page 17

Programming your remote using Easy Scan
1
2
3
4
5
Turn on your TV. Hold down
VOL - on DVR+ remote
for 2 sec until TV
button flashes twice.
Turn on your TV.
Point the DVR+ remote control at the TV.
Press and hold down both CH+ and VOL- on
the remote simultaneously for at least two
seconds. The blue TV button LED gives two
slow flashes to indicate successful entry into
setup mode.
Press INPUT. The TV button LED comes on.
Press TV POWER repeatedly until the TV
switches off.
Press INPUT. The TV button LED gives two
slow flashes to indicate that the code has been
stored successfully.
CH + and
Press INPUT .
Press the TV
Power button
until TV is off.
Getting Started ::
Press INPUT . TV
button flashes twice.
11