Turning On Your Dvr - Channel Master DVR+ User Manual

Getting Started
Turning on your new DVR+
When you switch on your Channel Master DVR+ for the first time,
it may take up to a minute for the unit to power up and display
the Setup Wizard. This will guide you through the steps to set up
your receiver and scan for free, over-the-air channels.
Highlight and
Validate the connections
select your
are hooked up correctly
Language &
and then press
Country. Press
continue.
OK to continue.
Programming the DVR+ remote control
The remote is capable of controlling basic functions of most TVs
(volume up/down, mute/unmute sound, TV power on/off, and
change input). To program the remote control to operate your TV,
you may use either of the following methods:
• Easy Scan as described on the following page.
• Code Entry as described on page 13.
:: Getting Started
10
The Channel Scan will
OK to
begin automatically.
After it is complete, the
next Step is displayed.
A list of online channels
from your Internet
connection is displayed.
Press OK to continue.
Highlight and
select your Zip
Code, Time
Zone & Setting.
Press OK to
finish setup.