H3C S5820V2H Configuration Manual page 41

Table of Contents

Advertisement

For more information about OSPFv3, see Layer 3—IP Routing Configuration Guide.
Configuring IPv6 IS-IS between an IPv6 MCE and a PE
Step
1.
Enter system view.
2.
Create an IS-IS process
for an IPv6 VPN
instance and enter IS-IS
view.
3.
Configure a network
entity title.
4.
Enable the IPv6
capacity for the IS-IS
process.
5.
(Optional.) Redistribute
the VPN routes.
6.
(Optional.) Configure a
filtering policy to filter
the redistributed routes.
7.
Return to system view.
8.
Enter interface view.
9.
Enable IPv6 for the IS-IS
process on the
interface.
For more information about IPv6 IS-IS, see Layer 3—IP Routing Configuration Guide.
Configuring EBGP between an IPv6 MCE and a PE
Step
1.
Enter system view.
2.
Enter BGP view.
3.
Enter IPv6 BGP-VPN
instance view.
4.
Configure the PE as the
EBGP peer.
5.
Create and enter BGP
IPv6 unicast instance
view.
6.
Enable BGP to exchange
IPv6 unicast routing
information with the
EBGP peer.
Command
system-view
isis [ process-id ] vpn-instance
vpn-instance-name
network-entity net
ipv6 enable
ipv6 import-route protocol [ process-id ]
[ allow-ibgp ] [ cost cost | [ level-1 |
level-1-2 | level-2 ] | route-policy
route-policy-name | tag tag ] *
ipv6 filter-policy { acl6-number |
prefix-list ipv6-prefix-name |
route-policy route-policy-name } export
[ protocol [ process-id ] ]
quit
interface interface-type interface-number
isis ipv6 enable [ process-id ]
Command
system-view
bgp as-number
ip vpn-instance vpn-instance-name
peer ipv6-address as-number as-number
ipv6-family [ unicast ]
peer ipv6-address enable
34
Remarks
N/A
N/A
By default, no NET is configured.
By default, IPv6 is disabled.
By default, IS-IS does not
redistribute routes of any other
routing protocol.
If you do not specify the route level
in the command, the command will
redistribute routes to the level-2
routing table by default.
By default, IPv6 IS-IS does not filter
the redistributed routes.
N/A
N/A
By default, IPv6 IS-IS is disabled on
an interface.
Remarks
N/A
N/A
N/A
N/A
N/A
By default, BGP cannot
exchange IPv6 unicast routing
information with a peer.

Advertisement

Table of Contents
loading

This manual is also suitable for:

S5830v2

Table of Contents