Coleman CT200U Assembly/Pre-Ride Inspection Instructions page 11

Inspecting and checking the
condition of the Mini Bike before
each ride is important. Following
the pre-ride check list will help
insure there are no problems which
could result in injury or becoming
stranded. Make sure the Mini
Bike is in good operating condition
before each ride.
WARNING
!
Failing to inspect and maintain the
Mini Bike could be hazardous.
Not following the pre-ride
inspection procedures could result
in loosing control of the Mini Bike
resulting in an accident or damage
to the Mini Bike
Always perform a Pre-ride inspec-
tion before each ride.
WARNING
!
Performing maintenance and
checks while the engine is running
could be hazardous.
You could be severely injured by
moving parts or hot surfaces.
Never perform maintenance or
check procedures while the engine
is running with the exception of
checking the engine stop switch or
throttle.
PRE-RIDE INSPECTION
WHAT TO CHECK FOR
CHECK
Steering •
•
Brakes •
Tires •
Fuel Tank •
•
•
Throttle •
grip
•
•
Engine •
Stop
Switch
Engine •
Oil
Drive •
Chain •
General •
Condition •
•
10
Smoothness
No restriction of
movement
Proper brake lever
play
Proper tire pressure
Enough fuel for the ride
Fuel cap secure
Hoses have no signs of
cracks or leaks
Throttle grip snaps
back to idle when
released
Operates freely
Has correct free play
Switch shuts off engine
when activated.
Correct oil level
Proper tension
Lubricated
Cotter Pins on axle
All nuts and bolts tight
No rattles from engine
or frame while running