Display On The Monitor - Panasonic WJ-HD500 Operating Instructions Manual

4. Press the DISPLAY button to display the record list with
the search (SEARCH) editing area as shown above.
5. Move the cursor to the position to be edited in the
search editing area by pressing the A or B button.
6. Select the desired digit or month by pressing the + or
- button.
7. Repeat procedures 5 and 6 to edit the other positions.
8. Press the PLAY/PAUSE button to start the search.
A list of records including the most recent recording will
appear on the monitor.
9. Rotating the JogDial clockwise or counterclockwise to
move the cursor to the record to be displayed on the
monitor.
10. Press the PLAY/PAUSE button to start playback.
The list or thumbnail search window is closed and the
selected playback image appears on the monitor.
83
DISPLAY

Display on the Monitor

The procedures described below are an example display-
ing the playback on the Multiscreen Monitor.
Single and Multiscreen Spot (Playback)
1. Select the group to be played back by pressing the
GROUP SELECT button.
2. Pressing the PLAY/PAUSE button will play back the
most recent recording in the forward direction.
The selected group images appear with the minimum
segment screen on the monitor.
(B) appears on the monitor screen to indicate that
playback is selected.
PLAY/ PAUSE
Note: When the ALARM SEARCH button is on, the Disk
Recorder plays back an alarm recording on the
Hard Disk.
3. Pressing the MULTISCREEN SELECT button will tog-
gle the display with the segments as shown below.
MULTISCREEN
SELECT
• Segments assigned to channels where no record-
ing takes place appear blacked out.
4. To display the image in single spot mode, select a
numeric button (1 - 16) corresponding to the image to
be displayed.
The selected image will be displayed on the monitor.
y