Major Operating Controls And Their Functions; Front View - Panasonic WJ-HD500 Operating Instructions Manual

MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS

Front View

e
w
q
q Operate Indicator (OPERATE)
Is on when the power of the WJ-HD500 Digital Disk
Recorder is turned on.
w Timer Indicator (TIMER)
Lights to indicate when the TIMER is set to INT (internal
timer) in the setup menu.
e Remote Indicator (REMOTE)
Lights to indicate when the Disk Recorder is controlled
by an outboard device via the Serial or 10/100BASE-T
port on the rear of the Disk Recorder.
r Alarm Suspend Indicator (ALARM SUSPEND)
Lights to indicate that the alarm suspension mode is
selected.
t Alarm Reset Button (ALARM RESET)
This button cancels an activated alarm.
Pressing this button will reset the alarm and return the
system to the condition before the alarm function was
activated.
y Alarm Indicator (ALARM)
This indicator blinks to indicate that an alarm condition
exists.
It changes to a steady light when the alarm is reset
automatically.
To turn the indicator off, press the ALARM RESET but-
ton.
6
t y u !0
r i o
LOCK
1 2
REMOTO
ALARM
SPOT
ALARM
MULTISCREEN
5 6
RESET
TIMER
MULTISCREEN
ALARM SELECT
9 10
SUSPEND
HDD
OPERATE
SEQUENCE
13 14
FULL
#1 #0
!1 !2 !3 !4 !5 !6
SELECT
REC STOP
3 4
SET
REC PREVIEW
7 8
ALARM SEARCH
EL-ZOOM
11 12
SET UP
/ESC DISPLAY
COPY
15 16
DAYLIGHT SAVINGS
@9 @8 @7 @6 @5 @4
u Sequence Button (SEQUENCE)
Runs the assigned sequence on the selected monitor
screen.
In this mode, a series of camera images is displayed in
succession on the monitor screen for the specified
duration.
i Multiscreen Selection Button (MULTISCREEN
SELECT)
Selects the multiscreen pattern to be displayed on the
Multiscreen Monitor that is connected to the MULTI
SCREEN OUT on the rear of the Recorder.
Pressing this button will toggle the display on the moni-
tor screen as shown below.
4 → 7 → 9 → 10 → 13 → 16 → 4 screen segments
o Monitor Selection Button (SPOT / MULTISCREEN)
Selects to control the display on the screen for either
the Spot or Multiscreen Monitor.
Pressing this button will toggle the indicator on the but-
ton on and off to indicate the selected monitor as shown
below.
On: Indicates the Spot monitor is selected.
Off: Indicates the Multiscreen monitor is selected.
!0 Lock Button (LOCK)
This button is used to lock out operation of the Disk
Recorder controls.
While the indicator on the button is lit, control from the
Disk Recorder is disabled.
!7 !8 !9 @0
STOP PLAY/ PAUSE REC
GROUP
INDEX
REV FWD
@3 @2 @1
16
FS
Digital Disk
Recorder
WJ-HD