Supplied Accessories - Panasonic H-RS100400 Operating Instructions Manual

• To prevent dust and other particles from accumulating on
or entering the lens, attach the lens rear cap when the lens
is not in use.
• To protect the lens contact points 1, do not place the lens
with its mount surface facing down. In addition, do not
allow the lens contact points to become dirty.
∫
About Condensation (Fogging of the Lens)
• Condensation occurs when there are differences in
temperature and humidity as described below.
Condensation can cause the lens to become dirty and
lead to mold and malfunctioning, so exercise caution in the
following situations:
– When the camera is brought indoors from outside during
cold weather
– When the camera is brought into an air-conditioned car
– When cold air from an air conditioner is directly blown
onto the lens
– In humid places
4
SQT1200
• If condensation occurs, turn the power off and leave it for about
two hours. Once the camera acclimatizes to the surrounding
temperature the condensation will go away naturally.

Supplied Accessories

Product numbers correct as of January 2016. These may
be subject to change.
1 2
SYQ0679
SFC0360
5
SYQ0680
1 Lens Pouch
2 Lens Hood
3 Lens Cap
4 Lens Rear Cap
5 External tripod mount
• The lens rear cap and lens cap are attached to the
interchangeable lens at the time of purchase.
3 4
SYF0074 VFC4605