Panasonic H-RS100400 Operating Instructions Manual page 7

∫ Attaching the Lens Hood (Supplied Accessory)
1 Rotate the lens hood screw in the
direction of the arrow to loosen it ( 1 ).
2 Insert the lens hood until it stops(2).
3 Rotate the lens hood screw in the
direction of the arrow to fasten the lens
hood securely (3).
Note
• When using the lens with the supplied lens hood, check if
the lens hood screw has become loose.
• If you use a lens hood and the flash at the same time, the
lens hood will block the light from the flash, causing the lower
portion of the screen to darken (vignetting) and making it
impossible to adjust the amount of light. We recommend not
using the lens hoods and flash at the same time.
• When carrying, the supplied lens
hood can be temporarily attached
in the reverse direction.
• Do not carry the lens
by holding only the
built-in slide lens
hood or the supplied
lens hood.
7
SQT1200