Fitting The Lens Cap; The Grip Belt - Panasonic NV-GS27GCT Operating Instructions Manual

LSQT1039ENG.book 7 ページ ２００６年２月１日 水曜日 午後３時１３分
(34) Shoulder strap fixture
2
≥Put the strap (NV-GS57 supplied) through the
fixture 1 and through the stopper 2 so it will
not come off. Extend part 3 by at least 2 cm.
≥Fit the other end of the belt similarly.

Fitting the lens cap

Fit the lens cap to protect the surface of the lens.
1
The lens cap and lens cap cord comes
preattached to the grip belt.
Pass the end of the lens cap cord through
the attached eye on the lens cap. Then pass
the lens cap through the loop made by itself
and pull tight.
≥When not using the lens cap, pull the lens cap
cord in the direction of the arrow. 1
≥When you are not recording, be sure to cover
the lens with the lens cap for protection. 2
1
Before using
≥When you remove the lens cap, press the knobs
firmly.
(34)

The grip belt

Adjust the belt length so it fits your hand.
1
Adjust the belt length.
1
3
1 Flip the belt.
2 Adjust the length.
3 Fix the belt.
2
3
1
2
LSQT1039
7